Tycon Power TP-DCDC-4824-HP PoE Injector - 48 V DC Input - 24 V DC, 1.25 A Output - 10/100/1000Base-T Input Port(s) - 10/100/1000Base-T Output Port(s) - 30 W
Description
integrated POE injector to apply the 24VDC or 56VDC to the CAT5 Ethernet cable. Passive POE and 802.3at models are available. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have a power output of up to 35W. The input and output are isolated so the units can accept minus voltage on input and can be wired for positive voltage on the output for those systems which are negative voltage based.
If the remote device does not support power over Ethernet, splitters (POE-SPLT) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.
Specifications
UNSPSC Code
39121004
Weight
1lb
Height
2in
Width
4in
Length
7in
Brand
Own Brand
Category
Power Injectors/Splitters
Height
1.5"
Input Ports
10/100/1000Base-T
Input Voltage
48 V DC
Length
4.9"
Limited Warranty
1 Year
Maximum Output Current
1.25 A
Maximum Output Power
30 W
Maximum Output Voltage
24 V DC
Output Ports
10/100/1000Base-T
Product Type
PoE Injector
Weight (approximate)
10.58 oz
Width
3"
Starting from
$49.95
/ EA
selection not available, try a different combination
selection not available, try a different combination
Compare
