
Description
UPS Maintenance Bypass Panel Keeps Equipment Powered During UPS Maintenance
This wall-mount three-breaker maintenance bypass panel is compatible with Tripp Lite's SUTX40K 3-phase UPS system. It allows you to reroute power around the UPS, providing an alternate path for electricity that keeps the connected load operational while the UPS is offline for maintenance or repairs.
Features 3 Built-In Circuit Breakers to Isolate Loads
Three 4-pole circuit breakers - an AC input breaker, a maintenance bypass breaker and a maintenance isolation breaker - are connected to heavy-duty buswork and isolate the UPS system from its connected load with no loss of network availability. This allows the load to remain continuously powered without costly downtime. A Kirk-key interlock system enhances safety and security. Removable handles allow the panel's trim cover to be removed for internal access. The 125A unit has a kAIC rating of 10K.
Switching Between Normal and Bypass Modes Is Easy
When a UPS needs maintenance, this UPS bypass panel keeps power supplied to components via its mechanical interlock system by switching power to the external bypass breaker. Simply unscrew the interlock switch, rotate the switch from the UPS AC input breaker (SW1) to the bypass breaker (SW2), then turn on the bypass breaker and turn off the UPS and isolation breaker (SW3) to perform UPS maintenance without service interruption.
Convenient Wall-Mount Installation
Made of galvanized steel, the service bypass panel has rear mounting holes for installation on a smooth, solid wall (mounting hardware not included).
Specifications
39121100
30lb
22in
25in
10in
Tripp Lite
Tripp Lite
Transfer Switches
Tripp Lite SUTX40K 3-phase UPS System
United States
125 A
4.6"
RoHS
Yes
Wall-mountable
17.5"
230 V AC
1 Year
Tripp Lite by Eaton
SUT40KMBPX
http://www.tripplite.com
- UPS Maintenance Bypass Panel for SUTX40K - 3 Breakers
- Installation and Operation Manual
Hard Wire 4-wire (3P + N + E)
SUT40KMBPX
UPS Maintenance Bypass Panel for SUTX40K - 3 Breakers
Bypass Panel
Yes
20 lb
20"
