0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To cart
Quote Me
Checkout
0
Tripp Lite

Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM - 10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"

Category PDUs
Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM - 10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"
Tripp Lite

Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM - 10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"

In Stock
Item Code: 2719678
Category PDUs
Manufacturer Tripp Lite by Eaton

Description

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

Specifications

UNSPSC Code

39121017

Weight

17.35lb

Height

5.6in

Width

21.1in

Length

23.3in

Brand

Tripp Lite

Brand Name

Tripp Lite

Category

PDUs

Country of Origin

Taiwan

Depth

14.8"

Environmental Certification

RoHS

Environmentally Friendly

Yes

Height

1.7"

Input Voltage

230 V AC

Limited Warranty

2 Year

Manufacturer

Tripp Lite by Eaton

Manufacturer Part Number

PDUMH20HVATNET

Manufacturer Website Address

http://www.tripplite.com

Mount Type

Rack-mountable

Mounting Orientation

Vertical

Output Voltage

220 V AC

Package Contents

  • PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
  • User Manual with Warranty Information

PDU Type

Switched

Product Model

PDUMH20HVATNET

Product Name

PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet

Product Type

PDU

Rack Height

1U

Receptacle Detail

2 x IEC 60320 C19

Receptacle Type

IEC 60320 C13

TAA Compliant

Yes

Weight (approximate)

10.30 lb

Width

17.3"

Starting from
$967.76 / EA
/
LIST PRICE $1,439.00
33%
- +
Add to quick list
Compare
Tripp Lite

Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM - 10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"

Category PDUs
Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM - 10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"
Tripp Lite

Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM - 10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"

In Stock
Item Code: 2719678
Category PDUs
Manufacturer Tripp Lite by Eaton

Description

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

Specifications

UNSPSC Code

39121017

Weight

17.35lb

Height

5.6in

Width

21.1in

Length

23.3in

Brand

Tripp Lite

Brand Name

Tripp Lite

Category

PDUs

Country of Origin

Taiwan

Depth

14.8"

Environmental Certification

RoHS

Environmentally Friendly

Yes

Height

1.7"

Input Voltage

230 V AC

Limited Warranty

2 Year

Manufacturer

Tripp Lite by Eaton

Manufacturer Part Number

PDUMH20HVATNET

Manufacturer Website Address

http://www.tripplite.com

Mount Type

Rack-mountable

Mounting Orientation

Vertical

Output Voltage

220 V AC

Package Contents

  • PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
  • User Manual with Warranty Information

PDU Type

Switched

Product Model

PDUMH20HVATNET

Product Name

PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet

Product Type

PDU

Rack Height

1U

Receptacle Detail

2 x IEC 60320 C19

Receptacle Type

IEC 60320 C13

TAA Compliant

Yes

Weight (approximate)

10.30 lb

Width

17.3"

Starting from
$967.76 / EA
/
LIST PRICE $1,439.00
33%
- +
Add to quick list
Compare
SEARCH ×