Tripp Lite PDU ATS / Metered 120V 1.92kW 20A 16 5-15/20R Dual L5-20P 1URM - Metered Auto Transfer Switch - NEMA 5-20P, NEMA L5-20P - 16 x NEMA 5-15/20R - 120 V AC - 1U - Horizontal - Rack-mountable, Wall-mountable - TAA Compliant
Description
Single-Phase 20A ATS PDU Distributes and Monitors Network-Grade Power in Real Time
This metered PDU provides real-time local reporting of the total load level via its built-in digital current metering. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMH20ATS features 16 NEMA 5-15/20R 120V outlets for connecting equipment. Dual 12-foot (3.7-meter) power cords with NEMA L5-20P inputs (two 5-20P adapters are included) connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources.
Switches from Primary to Secondary Power Source in Milliseconds
Automatic transfer switching (ATS) allows the PDU to switch to the secondary source within 2-7 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source.
Digital Load Meter Helps Prevent Potentially Expensive Overloads
A digital ammeter reports the total load for all connected equipment. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low.
Mounts into 1U of Rack Space or on a Wall
Use the included mounting hardware to install the all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter.
TAA-Compliant for GSA Schedule Purchases
The PDUMH20ATS is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Specifications
39121017
20.7lb
5.4in
23.3in
20.1in
Tripp Lite
Tripp Lite
PDUs
Taiwan
14.5"
RoHS
Yes
1.8"
20 A
120 V AC
2 Year
Tripp Lite by Eaton
PDUMH20ATS
http://www.tripplite.com
Rack-mountable
Horizontal
120 V AC
- 16-Outlets PDU
- Detachable C19 To NEMA L5-20P Secondary Input Cord, 12 Ft. (3.7 m)
- 2 x L5-20R To 5-20P Plug Adapters
- Cable Retention Kit
- Rack-Mounting Hardware
- Owner's Manual
Metered Auto Transfer Switch
Single Phase
2 x NEMA 5-20P
NEMA 5-20P
2030 W
16-Outlets PDU
PDU
Circuit Protection
1U
16 x NEMA 5-15/20R
NEMA 5-15/20R
Yes
12.20 lb
17.5"
Tripp Lite PDU ATS / Metered 120V 1.92kW 20A 16 5-15/20R Dual L5-20P 1URM - Metered Auto Transfer Switch - NEMA 5-20P, NEMA L5-20P - 16 x NEMA 5-15/20R - 120 V AC - 1U - Horizontal - Rack-mountable, Wall-mountable - TAA Compliant
