Description
The 12-fiber MTP/MPO connector is about the same size as an SC connector, but is 12 times denser, freeing up rack space for other cables. The APC connector is angled to prevent infrared light entering the fiber from bouncing back into the laser. The N390-01M-8LC-AP is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards.
The N390-01M-8LC-AP uses eight fibers to fully transmit 40GBASE-PLR4 with four fibers transmitting at 10 Gbps in each direction. Its slim, space-saving uniboot design allows easier cable management. The LC UPC connector's premium-grade ceramic ferrule is designed for fast applications of 10 GbE and higher.
The singlemode cable is colored yellow for instant identification in a crowded switch or patch panel. Push/pull tab connectors are easily accessible in high-density data center environments and make the plug-and-play cable easy to install and remove with one hand.
Specifications
26121607
0.14lb
Tripp Lite
Tripp Lite
Patch Cable
3.30 ft
Fiber Optic
Connector Cables
1 x MTP/MPO Network - Female
8 x LC Network - Male
MTP/MPO Network - Female
LC Network - Male
8.3/125 µm
China
100 Gbit/s
Hub
RoHS
Yes
Angled Connector
Single-Mode
Lifetime
Tripp Lite by Eaton
N390-01M-8LC-AP
http://www.tripplite.com
Yellow
N390-01M-8LC-AP
N390-01M-8LC-AP MTP/MPO to 8xLC Singlemode Breakout Patch Cable, Yellow, 1 m
Network Cable






