Tripp Lite HDMI Over Cat5 Cat6 Wall Plate Extender Transmitter Receiver TAA - Wall Mount
Description
With Tripp Lites HDMI Over Cat5/Cat6 Wallplate Extender Kit, you can locate a HDMI enabled display up to 230 ft. away from the HDMI source, using readily available Cat5 or Cat6 UTP cable (for best performance, use Solid wire Cat6). The kit consists of a Passive wallplate at the source side, and an Active wallplate (with built-in signal regenerator) at the display side. Simply run two Cat5/6 UTP cables between the two wallplates, and plug in standard Tripp Lite HDMI patch cables to the HDMI source and the display. The Green LED on the Display wallplate lets you know that power and a signal are coming from a connected source. The Red LED indicates only a signal is being received. The kit is functioning properly when the unit is connected to a display and the Green LED is lit.
Specifications
31162307
0.45lb
1.7in
5.6in
7.9in
Tripp Lite
Tripp Lite
Faceplates & Mounting Boxes
Taiwan
3 Year
Tripp Lite by Eaton
P167-000
http://www.tripplite.com
Wall Mount
- Cat5 Digital Audio/Video Faceplate
- HDMI Passive Wallplate (video source side)
- HDMI Active Wallplate with Signal Regenerator (display side)
- UTP Stripper/Punch Down Tool
2
P167-000
Cat5 Digital Audio/Video Faceplate
Faceplate
Yes
Tripp Lite HDMI Over Cat5 Cat6 Wall Plate Extender Transmitter Receiver TAA - Wall Mount
