Tripp Lite DVI Over Cat5/Cat6 Passive Video Extender Remote Video Receiver 100' - 1 Input Device - 1 Output Device - 100 ft Range - 1 x Network (RJ-45) - 1 x DVI Out - Full HD - 1920 x 1080 - Twisted Pair - Category 6 - TAA Compliant
Description
The B140-1P0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 100 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-1P0 is compatible with all operating systems, and is plug and play, with no external power, software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1P0's built-in DVI connector to a display. Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 50 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 100 ft..
Specifications
52161521
0.6lb
2.2in
6.4in
7.3in
Tripp Lite
Tripp Lite
Audio & Video Consoles/Extenders
Wired
Taiwan
Yes
RoHS
Yes
Full HD
1 Year
Tripp Lite by Eaton
B140-1P0
http://www.tripplite.com
100 ft
1920 x 1080
Twisted Pair
Yes
1
1
1
1
- B140-1P0 DVI Over Cat5 Passive Extender Remote Unit
- Owner's Manual
B140-1P0
DVI Over Cat5 Passive Extender Remote Unit
Video Extender Receiver
Yes
Category 6
Tripp Lite DVI Over Cat5/Cat6 Passive Video Extender Remote Video Receiver 100' - 1 Input Device - 1 Output Device - 100 ft Range - 1 x Network (RJ-45) - 1 x DVI Out - Full HD - 1920 x 1080 - Twisted Pair - Category 6 - TAA Compliant
