
Description
The B132-008A-2 uses VGA cable(such as Tripp Lite's P504-Series) to connect to the source and displays and Cat5e/6 cable to transmit to the remote receivers. For best results, use 24 AWG solid-wire N022-01K-GY(Cat5e) or N222-01K-GY(Cat6) cable.
When used with Tripp Lite's B132-Series active remote receivers, the B132-008A-2 can extend a 1920 x 1440(60 Hz) signal up to 500 feet and a 1024 x 768(60 Hz) signal up to 1,000 feet. By daisy-chaining up to six units, one audio/video source can transmit to as many as 49 displays-48 remote and one local.
Add up to three B132-110A remote repeaters to each channel to fully extend the signal range or add more displays. You can extend a 1920 x 1440(60 Hz) signal up to 500 feet or a 1024 x 768(60 Hz) signal up to 1,000 feet from the first repeater in the chain to the last receiver.
The B132-008A-2 also delivers high-quality audio and copies EDID information from a connected display to ensure optimal compatibility. Easy to set up with no Software Or Drivers To Install. Mounts To A Wall, Rack Or Pole Using The Included Hardware.
Specifications
43201614
3.9lb
2.2in
6.4in
14in
Tripp Lite
Tripp Lite
Audio & Video Consoles/Extenders
Wired
Taiwan
Wall Mountable
1 Year
Tripp Lite by Eaton
B132-008A-2
http://www.tripplite.com
1000 ft
1920 x 1440
Twisted Pair
Yes
1
8
1
1
Black
B132-008A-2
B132-008A-2 8-Port VGA + Audio over Cat5/6 Extender Splitter
Video Extender Receiver
3.90"
1.20"
1.50 lb
9.30"
Yes
Category 6
Yes
Yes
