0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To cart
Quote Me
Checkout
0
Tripp Lite

Tripp Lite 3-Port DisplayPort to HDMI Multi Stream Transport Hub MST 4Kx2K@24/30Hz - 3840 × 2160 - DisplayPort - HDMI Out

Category Signal Splitters/Amplifiers
Tripp Lite 3-Port DisplayPort to HDMI Multi Stream Transport Hub MST 4Kx2K@24/30Hz - 3840 × 2160 - DisplayPort - HDMI Out
Tripp Lite

Tripp Lite 3-Port DisplayPort to HDMI Multi Stream Transport Hub MST 4Kx2K@24/30Hz - 3840 × 2160 - DisplayPort - HDMI Out

Out of Stock
Item Code: 4607683
Category Signal Splitters/Amplifiers
Manufacturer Tripp Lite by Eaton

Description

The B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub connects up to three HDMI monitors to the DisplayPort output on your computer. Ideal for digital signage in schools, churches, conference rooms, trade shows, hotels and retail outlets, this hub allows you to display the same image on all three monitors, extend the desktop across them, or combine all three as one large monitor in video wall mode.The B156-003-HD-V2 is compliant with DisplayPort 1.2 and backward compatible with versions 1.1 and 1.1a with the feature set being limited to that of your equipment. It supports Ultra High Definition (UHD) video resolutions up to 3840 x 2160 (4K x 2K) at 24/30 Hz. In video wall mode, it supports expanded resolutions, such as 5760 x 1080 in a horizontal 1 x 3 monitor configuration or 1920 x 3240 in a vertical 3 x 1 configuration.This MST hub also supports HDCP, EDID, DDC and 48-bit Deep Color (16 bits per channel), as well as DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio. It works with all operating systems. Plug-and-play convenience means no software or drivers are needed. A built-in six-inch cable connects directly to a DisplayPort source. LEDs indicate when the monitors are receiving a signal. The B156-003-HD-V2 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
  • Computer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode. Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed.
  • MST compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.

System Requirements

  • Computer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode.
  • Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed.
  • Mac OS X does not support MST for NVIDIA and Intel Graphics Processor Units, limiting video display on connected monitors to mirror mode.
  • MST compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.
  • Monitor(s) with HDMI input.

    Specifications

    UNSPSC Code

    32101529

    Weight

    0.8lb

    Height

    2.4in

    Width

    6.5in

    Length

    8.5in

    Brand

    Tripp Lite

    Brand Name

    Tripp Lite

    Category

    Signal Splitters/Amplifiers

    Country of Origin

    Taiwan

    Depth

    3"

    DisplayPort

    Yes

    Environmental Certification

    RoHS

    Environmentally Friendly

    Yes

    HDMI Out

    Yes

    Height

    0.9"

    Input Voltage

    5 V DC

    Limited Warranty

    3 Year

    Manufacturer

    Tripp Lite by Eaton

    Manufacturer Part Number

    B156-003-HD-V2

    Manufacturer Website Address

    http://www.tripplite.com

    Maximum Video Resolution

    3840 × 2160

    Number of DisplayPort Inputs

    1

    Number of HDMI Outputs

    3

    Package Contents

    • B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub
    • External Power Supply with NEMA 1-15P Plug and 5 ft. Cord (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
    • Owner's Manual

    Product Model

    B156-003-HD-V2

    Product Name

    B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub

    Product Type

    Signal Splitter

    TAA Compliant

    Yes

    Weight (approximate)

    3.88 oz

    Width

    4.3"

    Starting from
    $80.70 / EA
    /
    LIST PRICE $120.00
    33%
    Add to quick list
    Compare
    Tripp Lite

    Tripp Lite 3-Port DisplayPort to HDMI Multi Stream Transport Hub MST 4Kx2K@24/30Hz - 3840 × 2160 - DisplayPort - HDMI Out

    Category Signal Splitters/Amplifiers
    Tripp Lite 3-Port DisplayPort to HDMI Multi Stream Transport Hub MST 4Kx2K@24/30Hz - 3840 × 2160 - DisplayPort - HDMI Out
    Tripp Lite

    Tripp Lite 3-Port DisplayPort to HDMI Multi Stream Transport Hub MST 4Kx2K@24/30Hz - 3840 × 2160 - DisplayPort - HDMI Out

    Out of Stock
    Item Code: 4607683
    Category Signal Splitters/Amplifiers
    Manufacturer Tripp Lite by Eaton

    Description

    The B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub connects up to three HDMI monitors to the DisplayPort output on your computer. Ideal for digital signage in schools, churches, conference rooms, trade shows, hotels and retail outlets, this hub allows you to display the same image on all three monitors, extend the desktop across them, or combine all three as one large monitor in video wall mode.The B156-003-HD-V2 is compliant with DisplayPort 1.2 and backward compatible with versions 1.1 and 1.1a with the feature set being limited to that of your equipment. It supports Ultra High Definition (UHD) video resolutions up to 3840 x 2160 (4K x 2K) at 24/30 Hz. In video wall mode, it supports expanded resolutions, such as 5760 x 1080 in a horizontal 1 x 3 monitor configuration or 1920 x 3240 in a vertical 3 x 1 configuration.This MST hub also supports HDCP, EDID, DDC and 48-bit Deep Color (16 bits per channel), as well as DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio. It works with all operating systems. Plug-and-play convenience means no software or drivers are needed. A built-in six-inch cable connects directly to a DisplayPort source. LEDs indicate when the monitors are receiving a signal. The B156-003-HD-V2 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
    • Computer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode. Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed.
    • MST compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.

    System Requirements

    • Computer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode.
    • Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed.
    • Mac OS X does not support MST for NVIDIA and Intel Graphics Processor Units, limiting video display on connected monitors to mirror mode.
    • MST compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.
    • Monitor(s) with HDMI input.

      Specifications

      UNSPSC Code

      32101529

      Weight

      0.8lb

      Height

      2.4in

      Width

      6.5in

      Length

      8.5in

      Brand

      Tripp Lite

      Brand Name

      Tripp Lite

      Category

      Signal Splitters/Amplifiers

      Country of Origin

      Taiwan

      Depth

      3"

      DisplayPort

      Yes

      Environmental Certification

      RoHS

      Environmentally Friendly

      Yes

      HDMI Out

      Yes

      Height

      0.9"

      Input Voltage

      5 V DC

      Limited Warranty

      3 Year

      Manufacturer

      Tripp Lite by Eaton

      Manufacturer Part Number

      B156-003-HD-V2

      Manufacturer Website Address

      http://www.tripplite.com

      Maximum Video Resolution

      3840 × 2160

      Number of DisplayPort Inputs

      1

      Number of HDMI Outputs

      3

      Package Contents

      • B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub
      • External Power Supply with NEMA 1-15P Plug and 5 ft. Cord (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
      • Owner's Manual

      Product Model

      B156-003-HD-V2

      Product Name

      B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub

      Product Type

      Signal Splitter

      TAA Compliant

      Yes

      Weight (approximate)

      3.88 oz

      Width

      4.3"

      Starting from
      $80.70 / EA
      /
      LIST PRICE $120.00
      33%
      Add to quick list
      Compare
      SEARCH ×