
Transition Networks Stand-alone Fast Ethernet PoE Media Converter - Network (RJ-45) - 1x PoE (RJ-45) Ports - 1 x SC Ports - Multi-mode - Fast Ethernet - 10/100Base-TX, 100Base-FX - 1.24 Mile - Power Supply - Wall Mountable
Description
Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with
-48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input.
This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities.
In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.)
The PoE converter is fully compatible with devices that comply with the IEEE
802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI.
Specifications
43201553
1.65lb
3.5in
5.5in
7in
Transition Networks
Transition Networks
Transceivers/Media Converters
Taiwan
4.8"
No
RoHS
Yes
Fast Ethernet
Multi-mode
1300 nm
Wall Mountable
1"
Lifetime
No
Transition Networks, Inc
SPOEB1013-105-NA
http://www.transition.com
1.24 Mile
Twisted Pair
Yes
10/100Base-TX
1
1
- Stand-Alone Fast Ethernet PoE Media Converter
- Power Supply
Power supply
SPOEB10xx-105
Stand-Alone Fast Ethernet PoE Media Converter
Transceiver/Media Converter
Duplex
2
No
2 lb
3.3"
