0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To cart
Quote Me
Checkout
0
NVT Phybridge

NVT Phybridge Power Supply Passive Video Receiver Hub - 750 ft Range - 10 x Network (RJ-45) - Twisted Pair - Category 5e - Rack-mountable, Wall Mountable, Desktop

Category Audio & Video Consoles/Extenders
NVT Phybridge Power Supply Passive Video Receiver Hub - 750 ft Range - 10 x Network (RJ-45) - Twisted Pair - Category 5e - Rack-mountable, Wall Mountable, Desktop
NVT Phybridge

NVT Phybridge Power Supply Passive Video Receiver Hub - 750 ft Range - 10 x Network (RJ-45) - Twisted Pair - Category 5e - Rack-mountable, Wall Mountable, Desktop

Out of Stock
Item Code: 5801757
Category Audio & Video Consoles/Extenders
Manufacturer Phybridge, Inc

Description

Features:
  • Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
  • Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
  • Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
  • Automatic-reset fault protection; transient protection
  • Individually floating outputs ensure total ground-loop immunity
  • Frequency response DC to 10MHz
  • Diagnostic LEDs show load/no load, miswires, and overload conditions
  • Use with the NV-216A-PV, NV-218A-PVD, or NV-226J-PV transceiver at the camera
  • Power cameras via UTP over significant distances (see Power Distance Chart)
  • 1U high; 8" deep; wall, desk, or rack-mountable, 2ft (60cm) BNC Cables included
  • Limited lifetime warranty
The 8-channel NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVDTM transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

Specifications

Brand

NVT Phybridge

Brand Name

NVT Phybridge

Category

Audio & Video Consoles/Extenders

Connectivity Technology

Wired

Environmental Certification

RoHS

Environmentally Friendly

Yes

Form Factor

Desktop

Limited Warranty

Lifetime

Manufacturer

Phybridge, Inc

Manufacturer Website Address

http://www.phybridge.com

Maximum Operating Distance

750 ft

Media Type Supported

Twisted Pair

Network (RJ-45)

Yes

Number of Network (RJ-45) Ports

10

Product Type

Video Extender Receiver

Receiver Depth

12"

Receiver Height

1.73"

Receiver Weight (Approximate)

14 lb

Receiver Width

19"

Twisted Pair Cable Standard

Category 5e

Starting from
$790.56 / EA
/
LIST PRICE $1,200.00
34%
Add to quick list
Compare
NVT Phybridge

NVT Phybridge Power Supply Passive Video Receiver Hub - 750 ft Range - 10 x Network (RJ-45) - Twisted Pair - Category 5e - Rack-mountable, Wall Mountable, Desktop

Category Audio & Video Consoles/Extenders
NVT Phybridge Power Supply Passive Video Receiver Hub - 750 ft Range - 10 x Network (RJ-45) - Twisted Pair - Category 5e - Rack-mountable, Wall Mountable, Desktop
NVT Phybridge

NVT Phybridge Power Supply Passive Video Receiver Hub - 750 ft Range - 10 x Network (RJ-45) - Twisted Pair - Category 5e - Rack-mountable, Wall Mountable, Desktop

Out of Stock
Item Code: 5801757
Category Audio & Video Consoles/Extenders
Manufacturer Phybridge, Inc

Description

Features:
  • Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
  • Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
  • Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
  • Automatic-reset fault protection; transient protection
  • Individually floating outputs ensure total ground-loop immunity
  • Frequency response DC to 10MHz
  • Diagnostic LEDs show load/no load, miswires, and overload conditions
  • Use with the NV-216A-PV, NV-218A-PVD, or NV-226J-PV transceiver at the camera
  • Power cameras via UTP over significant distances (see Power Distance Chart)
  • 1U high; 8" deep; wall, desk, or rack-mountable, 2ft (60cm) BNC Cables included
  • Limited lifetime warranty
The 8-channel NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVDTM transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

Specifications

Brand

NVT Phybridge

Brand Name

NVT Phybridge

Category

Audio & Video Consoles/Extenders

Connectivity Technology

Wired

Environmental Certification

RoHS

Environmentally Friendly

Yes

Form Factor

Desktop

Limited Warranty

Lifetime

Manufacturer

Phybridge, Inc

Manufacturer Website Address

http://www.phybridge.com

Maximum Operating Distance

750 ft

Media Type Supported

Twisted Pair

Network (RJ-45)

Yes

Number of Network (RJ-45) Ports

10

Product Type

Video Extender Receiver

Receiver Depth

12"

Receiver Height

1.73"

Receiver Weight (Approximate)

14 lb

Receiver Width

19"

Twisted Pair Cable Standard

Category 5e

Starting from
$790.56 / EA
/
LIST PRICE $1,200.00
34%
Add to quick list
Compare
SEARCH ×