
Kramer HDMI HDCP 2.2 Wall Plate Transmitter over PoC Long-Reach DGKat - 1 Input Device - 295.28 ft Range - 1 x Network (RJ-45) - 1 x HDMI In - 1080p, 1080i - Full HD - 1920 x 1080 - Twisted Pair - Wall Plate
Description
The WP-571 is a PoC DGKat™ wall plate transmitter for HDMI signals. The WP-571 converts an HDMI signal to a DGKat™ twisted pair signal that it transmits to a WP-572.
- Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
- HDTV Compatible.
- HDCP Compliant.
- DGKat™ Signal Integration - Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
- HDMI Support - HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD.
- 3D Pass-Through.
- System Range - Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables.
Note: Transmission range depends on the signal resolution, graphics card and display used. If using third-party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly. - EDID PassThru - Passes EDID signals between the source and display.
- Active Power Indication - The ON LED lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached.
- Power Connect™ System - A single connection to the transmitter or the receiver powers the system when the devices are within 90m (295ft) of each other.
Specifications
0.96lb
3.5in
6in
5.2in
Kramer
Kramer
Audio & Video Consoles/Extenders
Wired
Wall Plate
Full HD
Yes
7 Year
Kramer Electronics LTD
http://www.kramerelectronics.com
295.28 ft
1920 x 1080
Twisted Pair
Yes
1
1
1
White
Video Extender Transmitter
1080p
0.94"
4.50"
3.53 oz
2.75"
