0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleDipole - Omni-directional - SMA Connector

Category Antennas
Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleDipole - Omni-directional - SMA Connector

Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleDipole - Omni-directional - SMA Connector

Out of Stock
Item Code: 5462167
Category Antennas
Manufacturer Cisco Systems, Inc

Description

The LTE-ANTM-SMA-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G Long Term Evolution (LTE) and Long Term Evolution Advanced (LTEA) Service Routers (ISRs) and Pluggable Modules with an SMA connector.

The LTE-ANTM-SMA-D antenna is marked with a dual green band to indicate that it supports Cisco LTEA routers and modules.

This antenna has the following features:

  • Support for frequencies of 698-960, 1448-1511, and 1710-2690 MHz.
  • Standalone antenna peak gain of less than 3.7 dBi in the supported frequency bands.
  • Articulating joint that can maneuver into three stop positions: 0°, 45°, and 90°.
  • Male SubMiniature A connector that allows direct mounting of the antenna to any Cisco supported router or Pluggable Module with an SMA connector.
  • The SMA connector design has added rotational frictional torque to ensure the SMA interface stays properly mated, and to reduce chances of a disconnect. The design is also more finger friendly compared to a classic SMA hex nut design.


For optimal performance, we strongly recommend that you use two antennas to take full advantage of MIMO technology on all Cisco cellular routers that support MIMO (4G LTE and later releases).


Specifications

UNSPSC Code

43221706

Weight

1lb

Height

0.5in

Width

2in

Length

8.5in

Antenna Gain (Isotropic)

3.7 dBi

Application/usage

Wireless Router

Brand

Cisco

Brand Name

Cisco

Category

Antennas

Connector Type

Sma

Depth

0.43"

Directivity

Omni-directional

Form Factor

Dipole

Frequency Band Type

UHF

Height

9"

Manufacturer

Cisco Systems, Inc

Manufacturer Website Address

http://www.cisco.com

Operating Frequency Range

1447 MHz to 1511 MHz

Product Model

LTE-ANTM-SMA-D

Product Name

4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D)

Product Type

Antenna

Weight (approximate)

2 oz

Width

1.46"

Starting from
$37.13 / EA
/
LIST PRICE $52.02
29%
Compare

Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleDipole - Omni-directional - SMA Connector

Category Antennas
Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleDipole - Omni-directional - SMA Connector

Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleDipole - Omni-directional - SMA Connector

Out of Stock
Item Code: 5462167
Category Antennas
Manufacturer Cisco Systems, Inc

Description

The LTE-ANTM-SMA-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G Long Term Evolution (LTE) and Long Term Evolution Advanced (LTEA) Service Routers (ISRs) and Pluggable Modules with an SMA connector.

The LTE-ANTM-SMA-D antenna is marked with a dual green band to indicate that it supports Cisco LTEA routers and modules.

This antenna has the following features:

  • Support for frequencies of 698-960, 1448-1511, and 1710-2690 MHz.
  • Standalone antenna peak gain of less than 3.7 dBi in the supported frequency bands.
  • Articulating joint that can maneuver into three stop positions: 0°, 45°, and 90°.
  • Male SubMiniature A connector that allows direct mounting of the antenna to any Cisco supported router or Pluggable Module with an SMA connector.
  • The SMA connector design has added rotational frictional torque to ensure the SMA interface stays properly mated, and to reduce chances of a disconnect. The design is also more finger friendly compared to a classic SMA hex nut design.


For optimal performance, we strongly recommend that you use two antennas to take full advantage of MIMO technology on all Cisco cellular routers that support MIMO (4G LTE and later releases).


Specifications

UNSPSC Code

43221706

Weight

1lb

Height

0.5in

Width

2in

Length

8.5in

Antenna Gain (Isotropic)

3.7 dBi

Application/usage

Wireless Router

Brand

Cisco

Brand Name

Cisco

Category

Antennas

Connector Type

Sma

Depth

0.43"

Directivity

Omni-directional

Form Factor

Dipole

Frequency Band Type

UHF

Height

9"

Manufacturer

Cisco Systems, Inc

Manufacturer Website Address

http://www.cisco.com

Operating Frequency Range

1447 MHz to 1511 MHz

Product Model

LTE-ANTM-SMA-D

Product Name

4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D)

Product Type

Antenna

Weight (approximate)

2 oz

Width

1.46"

Starting from
$37.13 / EA
/
LIST PRICE $52.02
29%
Compare
SEARCH ×