C2G 50W Audio Amplifier - Plenum Rated - 8 Ohm - 20 Hz to 20 kHz
Description
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.
The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the TruLink® A/V Controller
This amplifier accepts a 3.5mm and RCA Stereo Audio input as well as a 3.5mm Microphone input. The mixing function ensures that audio from all three inputs are mixed and sent to the speaker outputs.
This amplifier is designed to accept either RS232 control or control signals from an industry standard volume control.
The PA sensor will automatically mute the audio inputs of the amplifier allowing the public address to be heard.
Specifications
UNSPSC Code
52161547
Weight
2.7lb
Height
3.1in
Width
9.6in
Length
8.8in
Brand
C2G
Brand Name
C2G
Category
A/V Receivers & Amplifiers
Classification
D
Country of Origin
Taiwan
Environmental Certification
RoHS 2
Environmentally Friendly
Yes
Impedance
8 Ohm
Limited Warranty
1 Year
Manufacturer
C2G
Manufacturer Part Number
40880
Maximum Frequency Response
20 kHz
Minimum Frequency Response
20 Hz
Number of Analog Audio Inputs
2
Product Color
Black
Product Name
8 Ohm 50W Audio Amplifier - Plenum Rated
Product Type
Amplifier
RMS Output Power
50 W
Weight (approximate)
2.66 lb
C2G 50W Audio Amplifier - Plenum Rated - 8 Ohm - 20 Hz to 20 kHz
